MF 9560 gives New Zealand Farmer Twice the Capacity, Less Stress

Southland, NZ farmer Mark Dillon’s new Massey Ferguson 9560 combine harvester has sped up his harvesting operation considerably and cut down on the amount of labour he needs. Mark and his wife Sonia took possession of the MF 9560 in...

MF 9560 gives New Zealand Farmer Twice the Capacity, Less Stress

Southland, NZ farmer Mark Dillon’s new Massey Ferguson 9560 combine harvester has sped up his harvesting operation considerably and cut down on the amount of labour he needs. Mark and his wife Sonia took possession of the MF 9560 in...

Southland, NZ farmer Mark Dillon’s new Massey Ferguson 9560 combine harvester has sped up his harvesting operation considerably and cut down on the amount of labour he needs.

Mark and his wife Sonia took possession of the MF 9560 in February to use on their Riversdale cropping farm and their contracting business, MJ and SE Dillon.

The Dillons looked at several other brands of harvester before settling on the Massey Ferguson and they have not looked back since.

“We started harvesting on 10th of February and have done close to 600 hectares of barley, wheat and oats with it,” Mark says.

“It’s been really good. We had extra grain this year and we needed extra capacity. We wouldn’t have got the harvest finished without it.”

Mark had previously been harvesting with his MF 865, which was used together with his brother James’ MF 750.

The MF 9560 features a 12,333 litre (9.75 tonne) grain tank, which Mark says can be fully unloaded in less than one-and-a-half minutes. His old MF 865 could only unload 4.5 tonnes in three to four minutes.

MF9560 Series

MF9560 at work during Harvest

“The new 9560 has really sped up the harvesting. One day we did 30 hectares, which was 350 tonnes in an afternoon. We could’ve done that before but we would’ve used both headers and had more staff and tractors and trailers and it would’ve been a big day.”

Mark says the 9560 has done a great job on his wheat, barley and oat crops.

“They have been big wheat crops that we are putting through that have gone flat but it’s handling the straw well,” he says.

“Some of the wheat was 23 percent moisture plus, and it went through the harvester alright. Some people were sceptical about how a rotary would go down in Southland because of the wet but it is handling the conditions no problems. We’ve headed in the rain for 10-15 minutes and it still handled it.”

The MF 9560 is also doing a good job on flat barley crops. Mark says autumn barley crops have been 9-10 tonnes per hectare, which is no trouble for the harvester.

“We’re down to 480 revs with the barley and it’s still threshing the grain out and leaving the crop in reasonable condition for baling,” he says.

“For oats I went through the factory settings and modified it to suit and the sample is good.”

Mark is a particular fan of the MF 9560’s Flex front, which follows the contours of the ground well.

“Some of our country is quite undulating. The harvester follows the ground contours pretty well. That was my concern going from a 16-foot front to 30-foot, but it’s following the rolling ground pretty well,” he says.

“The front lifts up four foot high for moving paddocks so you don’t have to take it off, which also saves time.”

The MF 9560 is built strong. It has minimal moving parts so it is simple to operate, and it is easily adaptable to multiple crops. It features auto lube and V-Cool, which keeps the engine and radiator clean, making it easy to service.

Mark says his new combine is reliable, has plenty of power for big jobs and has good fuel efficiency, with a simple efficient rotor drive.

“It does everything you need from a modern combine but it’s not too complicated. It only has nine belts and three chains on the whole machine and it’s built with plenty of steel,” he says.

The MF 9560 has also been designed with comfort in mind. The quiet, airconditioned cab is well laid out and easy to navigate, with operator foot rests for long days in the cab.

Access to all functions are carried out through a touch screen, with frequent adjustments having an additional dedicated out-of-screen adjustment source. Guidance runs on the same screen.

Leave a comment.

  • No comments yet. Use the form to start a conversation!

Stay Connected. Follow AGCO